Extron Electronics USP 405 User Guide - Manual (Page 32)

Installation and Operation, cont’d
USP 405 • Installation and Operation 2-16
NEXT
Save Preset
1 2 3
Erase Preset
1 2 3
NEXT NEXT
Saving (SAVE) memory presets
• Save the currently selected input's
sizing and centering information.
• Up to 3 presets per input can be
selected < > (N/A is the default) and
saved.
• Save a preset by pressing the NEXT
button.
Erasing (erase) memory presets
• Erase the currently selected input's
saved sizing and centering
information.
• Up to 3 presets per input can be
selected < > (N/A is the default)
and erased.
• Erase a preset by pressing the
NEXT button.
Output
Configuration
Memory
Presets
MENU
Using either the horizontal Adjust ( ) or vertical Adjust ( ) knob, select (< >)
either N/A, 1, 2, or 3 to select a preset. The default is . To save the preset,
press the Next button.
Erase memory presets submenu
From this submenu, up to three saved presets for the currently selected input can
be erased from memory.
Using either the horizontal Adjust ( ) or vertical Adjust ( ) knob, select (< >)
either N/A, 1, 2, or 3 to select a preset. The default is . To erase the
preset, press the Next button.
Recalling a preset
To recalling an input’s saved preset, select the input , then press the input button
successively to recall any saved preset (up to three saved presets). The available
presets are sequentially selected in a loop*: preset 1, preset 2, preset 3, preset 1,
preset 2, and so forth, depending on which presets are available.
Each recalled preset displays the LCD message “Input #X Memory Y”, where
“X” refers to the input (2 to 5) and “Y” refers to the preset (1 to 3). The absence of
any saved presets does not display the LCD message for the missing preset.
* The actual presets will depend on what presets (1, 2, or 3) have been saved for
an input. For example, if only presets 1 and 3 are available, the sequential
looping of the presets as the input button is repeatedly pressed will be:
preset 1, preset 3, preset 1, preset 3, and so forth.
Presets are valid only for the input/output resolutions under which they
were saved.