Extron Electronics USP 405 User Guide - Manual (Page 45)

3-5 USP 405 • Serial Communication
Horizontal size
Increase the horizontal size +: Hsz Widen the picture.
Decrease the horizontal size -: Hsz Make the picture narrower.
Vertical size
Increase the vertical size +; Vsz Make the picture taller.
Decrease the vertical size -; Vsz Make the picture shorter.
Horizontal detail filter – RGB & HDTV only
Set a specific filter value X10 D Dhz X10 Set the horizontal detail level.
Increment + D Dhz X10 Increase the horizontal detail.
Decrement - D Dhz X10 Decrease the horizontal detail.
View the horizontal filter value D X10 Show the horizontal detail
level.
Vertical detail filter – RGB & HDTV only
Set a specific filter value X10 d Dvz X11 Set the vertical detail level.
Increment +d Dvz X11 Increase the vertical detail.
Decrement -d Dvz X11 Decrease the vertical detail.
View the vertical filter value d X11 Show the vertical detail level.
Detail filter – all other formats except RGB & HDTV
Set a specific detail filter value X10 D Dhz X10 Set the detail level.
Increment + D Dhz X10 Increase the detail.
Decrement - D Dhz X10 Decrease the detail.
View the detail filter value D X10 Show the detail level.
Top blanking
Specify a top blanking value X18 ( Blt X18 Set the number of lines to
blank at the top of the picture.
Increase the top blanking value +( Blt X18 Increase the # of top lines
blanked.
Decrease the top blanking value -( Blt X18 Decrease the # of top lines
blanked.
View the top blanking value ( X18 Show the number of lines that
are blanked at the top of the
picture.
Bottom blanking
Specify a bottom blanking value X18 ) Blb X18 Set the number of lines to
blank at the bottom of the
picture.
Increase the bottom blanking value +) Blb X18 Increase the number of lines
blanked at the bottom.
Decrease the bottom blanking value-) Blb X18 Decrease the number of
bottom lines blanked.
View the bottom blanking value ) X18 Show the # of bottom lines
that are blanked.
Freeze
Enable 1F Frz1 Output a “frozen” video
image.
Disable 0F Frz0 Turn off freeze (output motion
video).
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to USP) (USP to host)
(Continued)