Extron Electronics PoleVault Systems PVS 305SA - Manual (Page 35)

2-24 PoleVault Systems Installation • Installation — Stage 5
Stage Five — Configure the Switcher and the System
1. Configure the switcher — MLS Switcher
Configuration program
a. Run the DVD (or download) and install on a PC or laptop
the Extron MediaLink Switcher Configuration program.
b. Ensure the PC and the MLC 104 IP Plus are connected to
the LAN.
N If this is not possible, connect a 2.5 mm TRS
configuration cable (part # 70-335-01) to the PC
and to the front panel configuration port of
the MLC 104 IP Plus.
c. Launch the MLS Configuration utility. Select the
connection format (RS-232 or TCP/IP), or select the
emulation mode (see figure 1c ).
N An offline emulation of the PVS 305SA can aid in
becoming familiar with the PVS 305SA before
configuring an active unit.
d. Once the program is running click on Help, Contents (or
press F1), and follow the instructions.
Stage 5
Items needed to help complete this stage:
•
Laptop (or PC) with a network connection
• MLS Configuration program (on supplied DVD or by
download from www.extron.com )
• Global configurator software
• MLC 104 IP Plus User’s Manual
• Projector manufacturer’s user’s manual
• Device driver and/or driver package (download from
www.extron.com )
The MLS Configuration Utility software
1c Launch the MLS Configuration program
1d
Select “Help, Contents” and follow
instructions
The PVS 305SA emulation mode screen