Extron Electronics IPL T PC1i User Guide - Manual (Page 69)

IR control interface
IR control port ................................ (1) 3.5 mm captive screw connector, 4 pole (shared with contact closure input
port)
Pin configuration ............................ 3 = S (IR signal output), 4 = GND
IR output carrier frequency ............. 30 kHz to 1 MHz
General
Power input ................................... Internal
100-240 VAC, 50-60 Hz
5 watts
IPL T PC1 ................................. 12 A (max.)
IPL T PC1i ................................ 10 A (max.)
Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling .......................................... Convection, no vents
Mounting
Rack mount ............................. Yes, with optional 1U rack shelf
Furniture mount ...................... Yes, with optional under desk mounting kit
Enclosure type ................................ Metal
Enclosure dimensions ..................... 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight ............................... 1.0 lbs (0.5 kg)
Shipping weight ............................. 3 lbs (2 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety
IPL T PC1............................ CE, c-UL, UL
IPL T PC1i ........................... CE
EMI/EMC ................................. CE, C-tick, FCC Class A, ICES, VCCI
MTBF ............................................. 30,000 hours
Warranty ........................................ 3 years parts and labor
NOTES: • All nominal levels are at ±10%.
• Specifications are subject to change without notice.
IPL T PC1 • SIS Programming and Control 63