Extron Electronics IPL T PC1i User Guide - Manual (Page 56)

Symbol Definitions
] = CR/LF (carriage return + line feed) (hex 0D 0A)
} = Soft carriage return (no line feed, hex 0D)
(For web browser commands, use the | [pipe] character instead of the soft return.)
| = Pipe (vertical bar) character
• = Space
24 = The 24 superscript indicates commands that give an E24 (privilege violation) message if you are not logged in at the
administrator level.
E = Escape key (hex 1B) (For web browsers, use W instead of E. )
X! = Power receptacle (1-4)
X# = Greenwich Mean Time (GMT) offset value
(-12.00 to +14.00) represents the time difference in hours and minutes (±hh:mm) relative to Greenwich, England. The
plus sign and leading zero are optional. For example, 5:30 = +05:30.)
X% = On or Off status
0 = off or disable
1 = on or enable
X^ = Dirty memory status
1 = RAM needs to be saved to flash memory.
0 = RAM has been saved to flash (OK to power off or reset) .
X( = Current threshold sense
0 = clear or none
1 = standby
2 = full
(Full threshold must be set before standby.)
X1) = Group number
0 = none
1 = yellow
2 = green
3 = red
(The exponent designates the port number. The color relates to setting groups via the front panel.)
X1! = Version (typically listed to two decimal places, that is, n.nn)
X1@ = Unit name. The name of the PC1 is a text string of up to 24 characters drawn from the alphabet (A-Z), digits (0-9),
and minus sign or hyphen ( - ). No blank or space characters are permitted as part of a name. No distinction is made
between upper and lower case.
NOTE: The first character must be a letter. The last character must not be a minus sign or hyphen.
X1# = Local date and time format
Set format (MM/DD/YY-HH:MM:SS).
Example: 11/18/03-10:54:00.
Read format (day of week, day month year HH:MM:SS).
Example: Tue, 18 Nov 2011 18:19:33.
X1$ = IP address (nnn.nnn.nnn.nnn ) . Leading zeros in each of four fields are optional in setting values, and they are
suppressed in returned values.
X1% = E-mail domain name (for example: extron.com)
X1^ = Power-up delay between ports in 1/3-second increments. 1-255 permitted.
(Default is 3, which equals 1 second.)
IPL T PC1 • SIS Programming and Control 50