Extron Electronics IPL T PC1i User Guide User Manual
Page 42
Scheduling front panel lockout (executive mode)
1.
In the Executive Mode section, click
On
or
Off
to select the lock mode setting that you
want to schedule. A Set Schedule For section appears above the Scheduling section,
displaying the current status of Executive Mode (
On
or
Off
); menus from which to select
the hour, minutes, and am or pm; and check boxes for the days of the week.
The illustration below shows the Set Schedule For section, with executive mode
scheduled to be disabled at 6:00 am Monday through Friday. (In the Executive Mode
section in the example below, front panel lockout has been scheduled to start at
7:30 pm, Monday through Friday.)
Figure 28.
“Set Schedule For” Field for Executive Mode
2.
From the drop-down menus, select the time (hour, minutes, and am or pm) at which
you want executive mode enabled or disabled.
3.
Select the check boxes for the days of the week you want lock mode to be turned on or
off at the time you specified.
4.
When finished, click
Set
to save your settings and close the Set Schedule For section.
The settings you entered appear on the Current Schedule in the Executive Mode section.
5.
Repeat steps 1 through 4 as needed to specify lock mode settings for other days.
NOTE: You cannot set Receptacle On and Off for the same time.
IPL T PC1 • HTML Configuration and Control
36