Windows-based control program, Installing the software from the disk – Extron Electronics DSC HD-3G A User Guide User Manual
Page 68
Windows-based Control Program
The Extron Product Configuration Software (PSC) is a Windows-based program for the
DSC that provides a convenient way to configure the input and output, audio, and image
settings. It also lets you save and recall presets and perform nearly all the other functions
that can be accomplished via the front panel controls or SIS commands. The Product
Configuration Software is provided on a disk that is delivered with your DSC unit and can
also be downloaded fr
. To use the software, you must install the
program on your PC as described in the following sections.
Installing the Software from the Disk
To install the PSC software from the provided DVD:
1.
Insert the Software Products DVD into your computer CD or DVD drive. The disk
should start automatically. If it does not, open your Windows Explorer and double-
click
LAUNCH.EXE
on the CD or DVD drive to start it.
2.
On the Extron Software DVD screen (shown in figure 29), click the
Software
link.
VD
Figure 29.
DVD Main Screen
3.
In the table on the Control Software screen, scroll to locate the PCS for DSC, and
click the
Install
link in the far right column.
Figure 30.
PCS for DSC Link on Software DVD Screen
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control
62