beautypg.com

Extron Electronics DSC HD-3G A User Guide User Manual

Page 25

background image

From this menu, you can configure the following:

Auto-Image — Select this option, then press Enter to perform a one-time
Auto-Image on the video input (see

Auto-Image

on page 35 for more information

about this function).

Input EDID — (DSC HD-3G A only) Select this option to match the input EDID to the
output rate or to set a discrete EDID (see the

input EDID table

on page 24 for EDID

data). The default is

720P

@

59.94

Hz

.

Output Resolution — This option lets you set the resolution and refresh rate for the
current output. The DSC 3G-HD A has 42 factory installed output resolutions and
rates and 3 custom user defined blocks for new resolutions (see the

DSC 3G-HD A

resolutions table

on page 26). The DSC HD-3G A has 30 factory output resolutions

and rates (no custom rates) (see the

DSC HD-3G A resolutions table

on page 28).

Auto Memory — Select this option to enable or disable Auto Memories. When you
select On, the DSC automatically stores the current input configuration and picture
control values as an input preset in one of its 32 Auto Memory locations (see

Auto

Memories

on page 38 for more information).

Aspect Ratio — This option lets you specify how much of the display the image will
fill. The sub-options are

Fill

(fills the entire screen) and

Follow

(displays with the

aspect ratio of the input).

Input Audio Format — This option enables you to select the format of the audio (if
any) that will be embedded in the output (see the

audio formats table

on page 30

for more information). Selecting

None

mutes the audio.

Test Pattern — This option lets you choose a test pattern to aid in setting up
the DSC and the corresponding output display. Available patterns are: Off (no test
pattern), Crop, Alternating Pixels, Crosshatch, Color Bars, Grayscale, Blue Mode, and
Audio Test (displays a crop pattern with OSD text

AUDIO TEST

and outputs 48 kHz,

24 bit pink noise).

User Presets submenu

This submenu (shown in

figure 16

on the next page) allows you to save positioning and

sizing information and picture adjustments as a User preset. You can recall saved presets,
easily applying their settings to frequently used sources. Presets can also be overwritten
or cleared via this menu. (The User Presets submenu is the same on both DSC models.)

Up to three user presets per input can be saved or recalled.

A user preset can be saved with one input resolution and later recalled with another
resolution. For example, you could save a preset at 720p and recall it at 1080p.

DSC 3G-HD A and DSC HD-3G A • Operation

19

This manual is related to the following products: