Using the front panel buttons with the osd menus, Using the front panel buttons with the, Osd menus – Extron Electronics DSC HD-3G A User Guide User Manual
Page 22

Using the Front Panel Buttons with the OSD Menus
The front panel navigation buttons enable you to access the OSD and make selections
from its menus.
•
Menu — Press this button to open and close the OSD. Pressing it from within a
submenu or a submenu option returns you to the next higher menu level.
For example, if you select and highlight a submenu option you did not want, pressing
Menu changes the highlighting of the option to an outline. From there, you can use
the up and down arrow buttons to move the outline to the desired option.
•
Enter — Press this button to access the options on the displayed submenu (moves a
yellow outline to the first submenu option in the right column). Press this button again
to select the outlined submenu option. (You can also use the Enter button to open the
OSD, but not to close it.)
•
Left arrow
t
— Press this button to adjust settings on screens displayed as a
result of selecting submenu options. For
Picture
Controls
submenu options with
(for example,
Brightness
and
Contrast
or
H
and
V
) press this button to select the
sub-option on the
left, then use the
and
buttons to adjust the sub-option
settings.
•
Right arrow
— Press this button adjust settings on screens displayed as a result
of selecting submenu options. For
Picture
Controls
submenu options, press this
button to select the sub-option on the
right, then use the
and
buttons to adjust
the sub-option settings.
When the OSD is closed, pressing this button performs an Auto-Image (see
on page 35).
•
Up arrow
— Press this button to move upward through main menu and submenu
options. This button also adjusts settings on screens displayed as a result of selecting
submenu options.
•
Down arrow
— Press this button to move downward through main menu and
submenu options. This button also adjusts settings on screens displayed as a result
of selecting submenu options.
You can also use this button to reset the output rate (see
on page 37 and in conjunction with the Menu button to lock the front panel (see
Locking the Front Panel (Executive Mode)
DSC 3G-HD A and DSC HD-3G A • Operation
16