Extron Electronics DSC HD-3G A User Guide User Manual
Page 15
2.
If this is the first time you have connected a DSC to this particular USB port on your
computer, one of the following screens may open:
•
Windows XP and earlier: If the following screen is displayed, specify whether
you want the computer to connect to Windows Update in order to search the
web for the driver that it needs to communicate with the DSC via the USB port
(this is not necessary if the USB driver already exists on your computer).
Figure 8.
Found New Hardware Wizard Opening Screen
Select one of the following radio buttons:
•
Select the
Yes,
this
time
only
radio button if you want your computer to
connect to Windows Update only this one time.
•
Select
Yes,
now
and
every
time
I
connect
a
device
if you want the
computer to automatically connect to Windows Update every time the DSC
is connected to this USB port.
•
Select
No,
not
this
time
if you do not want the computer to connect to
Windows Update at this time (for example, if the driver is already installed).
NOTE: This wizard appears only the first time you connect the DSC to each
USB port. You do not see the wizard again unless you connect the DSC to a
different USB port on your computer.
DSC 3G-HD A and DSC HD-3G A • Installation
9