Extron Electronics DSC HD-3G A User Guide - Manual (Page 30)

• Input EDID — (DSC HD-3G A only) This option lets you select an EDID (resolution
and refresh rate) emulation for the HDMI input. You can match the input EDID to the
output rate or set a discrete EDID. The default is
720P @ 59.94 Hz . The table below
shows the available EDID selections.
Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz 30 Hz 50 Hz 59.94 Hz 60 Hz
C1: nnnnXnnnn @nnHz Custom EDID 1
C2: nnnnXnnnn @nnHz Custom EDID 2
C3: nnnnXnnnn @nnHz Custom EDID 3
640 x 480 X
800 x 600 X
852 x 480 X
1024 x 768 X
1024 x 852 X
1024 x 1024 X
1280 x 768 X
1280 x 800 X
1280 x 1024 X
1360 x 765 X
1360 x 768 X
1365 x 768 X
1366 x 768 X
1440 x 900 X
1400 x 1050 X
1600 x 900 X
1680 x 1050 X
1600 x 1200 X
1920 x 1200 X
480i (PAL) X
576i (NTSC) X
480p X X
576p X
720p* X X X X X * X
1080i X X X
1080p X X X X X X X X
2k (2048 x 1080) X X X X X X X X
*Default resolution and rate
Selecting an input EDID
To select a resolution and rate for input emulation:
1. From the Input menu, select Input EDID .
2. Press the t or  button to select a resolution.
3. Press the  or

button to select a rate for the resolution.
4. When finished, press Menu to return to the Input submenu or wait for the DSC
to time out (approximately 1 minute). Your selections are saved and appear next
time you open the OSD.
DSC 3G-HD A and DSC HD-3G A • Operation 24