Output configuration commands, Output scaler rate sis commands, Ed timings) (see the – Extron Electronics DSC HD-3G A User Guide User Manual
Page 60: Output edid command, Input presets commands
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Presets (continued)
Input Presets
Recall preset
2 *
X2^
.
2 Rpr
X2^
]
Recall input preset
X2^
for
selected input.
Save preset
2 *
X2^
,
2 Spr
X2^
]
Save input preset
X2^
for
selected input.
Delete/clear preset
E
X 2 *
X2^
PRST
}
Prst X 2 *
X2^
]
Clear input preset
X2^
and set
its name to [unassigned].
Input Preset Name
Write name
E
2 *
X2^
,
X1$
PNAM
}
Pnam 2 *
X2^
,
X1$]
Set the name of input preset
X2^
to
X1$
.
Read name
E
2 *
X2^
PNAM
}
X1$
]
In verbose modes 2 and 3:
Pnam 1 *
X2%
,
X1$
]
View the name of input preset
X2^
.
NOTE:
Unnamed presets are shown as [unassigned]. To restore a default input preset name, enter a single space
character for
X1$
. These entries are valid only for previously saved presets.
Output Configuration
Output EDID (DSC 3G-HD A only)
Save output EDID
E
S 1
X2!
EDID
}
Edid S 1 *
X2!
]
Save the EDID of the current
DSC 3G-HD A output to
X2!
.
Output Scaler Rate
Set output rate
E
X2)
RATE
}
Rate
X2)
]
Select the DSC 3G-HD A
output resolution and refresh
rate.
View output rate
E
RATE
}
X2)
]
Rate
X2)
]
Show selected output rate.
NOTE:
X1$
= Preset name, up to 16 characters
X2)
= Output resolution and refresh rate:
•
DSC 3G-HD A: 1 – 92.
1 = EDID of connected HDMI display, 2 = Custom rate 1, 3 = Custom rate 2, 4 = Custom rate 3,
9 = Match the input rate (if the current input is not a valid output rate, defaults to 720p @ 60 Hz [73]).
For variables 11-92, see the
on page 44.
•
DSC HD-3G A: 0 – 96.
0 = Automatic: matches current output resolution (default), 1 = Custom rate 1, 2 = Custom rate 2,
3 = Custom rate 3, 9 = Match the input rate.
For variables 65-96, see the
on page 45.
Response is 2 digits padded with a zero.
X2!
= EDID emulations: 0 = Automatic: matches current output resolution (default),
1 = Custom EDID 1, 2 = Custom EDID 2, 3 = Custom EDID 3, 9 = Match the input rate.
For
variables
11-96, see the
Response is 2 digits padded with a zero.
X2^
= Input preset number: 1 – 128. Response is 2 digits padded with a zero.
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control
54