beautypg.com

Extron Electronics DSC HD-3G A User Guide User Manual

Page 18

background image

c

Input signal information LEDs

DSC 3G-HD A: Input Rate LEDs — One of these four green LEDs lights when
the unit is powered on, indicating the type of input signal that is present.

Unknown: The signal does not reference SMPTE 259M, 292M, or 424M.

2.97 Gbps: SMPTE 424M — 1080p @ 50 Hz and higher or 2k @ greater
than 30 Hz

1.485 Gbps: SMPTE 292M — 720p or 1080i, 1080p @ up to 30 Hz

270 Mbps: SMPTE 259M — 480i or 576i

DSC HD-3G A: Input LEDs — These four green LEDs light to indicate presence
of an input signal and the type of audio signal if one is also present.

Signal: An input signal is present.

2Ch-LPCM: Two-channel LPCM audio signal is present.

Multi-Ch PCM: Multi-channel PCM audio signal is present.

Analog: Analog audio signal is present.

d

Output signal information LEDs

DSC 3G-HD A: Output LEDs — These four green LEDs light to indicate the
presence of sync and other information about the signal being output.

Sync: Sync is present. (If the video is muted, this LED does not light.)

HDTV: Lights to indicate 2k, 1080p, 1080i, 720p, 480p, 576p rates, or
custom HDTV rates

PC: VESA standard or custom computer rates

Audio: Embedded audio is present.

DSC HD-3G A: Output LEDs — These four green LEDs light to indicate the
presence of sync and the output rate specified for the output (output rates can
be specified using SIS commands, the Windows-based control program, or the
OSD).

Sync: Sync is present. (If the video is muted, this LED does not light.)

2.97 Gbps: SMPTE 424M

1.485 Gbps: SMPTE 292M

270 Mbps: SMPTE 259M

e

Menu and Enter buttons — These buttons let you access and make selections
from the on-screen display menus (see

Using the Front Panel Buttons with the

OSD Menus

on page 16 for detailed explanations of these buttons and the arrow

buttons.

f

Navigation Buttons — These left

t

, right

, up

, and down

arrow buttons

enable you to step through the OSD submenus. You can also press them to

lock

the front panel controls

(executive mode) (see page 40), perform

Auto-Image

(see

page 35), and

reset the output rate

(see page 37).

DSC 3G-HD A and DSC HD-3G A • Operation

12

This manual is related to the following products: