See the, Reset command – Extron Electronics DSC HD-3G A User Guide User Manual
Page 66
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
On-Screen Menu Configuration (Front Panel Control Button Emulation)
NOTES:
•
An E13 error code is returned if a navigation button command other than R MENU (right arrow button) is sent while
the OSD menu system is Off.
•
The right arrow command can be used to initiate an Auto-Image, therefore, it does not return an error code.
•
An E14 error code is returned if a menu emulation command is sent while the unit is in front panel lock mode.
•
The unit exits power save mode if a menu emulation command is sent while the DSC is in power save mode.
Toggle menu on and off
E
M MENU
}
Menu * M
]
Emulate the Menu button:
Toggle the OSD menu on and
off.
Enter menu system
E
A MENU
}
Menu * A
]
Discretely enter the OSD menu
system.
Enter menu system
E
X MENU
}
Menu * X
]
Discretely exit the OSD menu
system.
Enter (select)
E
E MENU
}
Menu * E
]
Emulate the Enter button
(select a submenu or option)
Up Arrow
E
U MENU
}
Menu * U
]
Emulate the
button.
Down Arrow
E
D MENU
}
Menu * D
]
Emulate the
button.
Left Arrow
E
L MENU
}
Menu * L
]
Emulate the t button.
Right Arrow
E
R MENU
}
Menu * R
]
Emulate the button.
View menu status
E
MENU
}
X3)
]
In verbose modes 2 and 3:
Menu *
X3)
]
View the OSD menu On/Off
status.
Reset
Reset all device settings
to factory default
settings
24
E
ZXXX
}
Zpx
]
Information Requests
General Information
DSC 3G-HD A
I
Vid 1 • Typ
X@
• Amt
X1)
• Blk
X4@
• Hrt
X1#
• Vrt
X1#
]
DSC HD-3G A
I
Vid 1 • Typ
X#
• Amt
X1)
• Blk
X4@
• Hrt
X1#
• Vrt
X1#
]
(Responses are the same in verbose modes 2 and 3.)
View video input signal type,
audio mute status, video mute
status, and horizontal and
vertical frequencies.
NOTE:
X@
= Input video format for DSC 3G-HD A: 0 = No signal, 1 = SD: 480i, 2 = SD: 576i,
3 = HD: 480p, 576p, 720p, 1080i, 1080p (up to 30 Hz), 4 = 3G: 1080p (@50, 59.94, and 60 Hz), 2k
X#
= Input video format for DSC HD-3G A: 0 = No signal, 1 = HDMI, 2 = DVI, 3 = Invalid signal
X1)
= Audio mute status: 0 = Unmuted (audio on = default), 1 = Muted
X1#
= Horizontal and vertical frequencies.
Response is 3 digits with a single decimal place and padded with zeros.
X3)
= OSD menu system status: 0 = Menu off, 1 = Menu on (displayed)
X4@
= Video mute (blanking) status: 0 = Off (unmuted), 1 = On (muted to black screen),
2 = On (all output sync and video muted)
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control
60