Extron Electronics DSC HD-3G A User Guide User Manual
Page 24
7.
Press Enter to confirm your new values. Press it again if action confirmation is
required. The yellow highlighting is replaced by the yellow outline on the menu screen.
8.
Do any of the following:
•
Press the
t
or
button to move to another option on the submenu and repeat
steps 5 through 7.
•
Press Menu to exit the submenu.
•
Press Menu twice to exit the submenu and close the main menu.
NOTES:
•
Values in submenus that do not apply to the current input are shown as
N/A
.
•
An asterisk following an item indicates that it is the default.
•
The OSD times out and closes after 1 minute if no buttons are pressed.
Quick Setup submenu
This submenu (see figure 15) allows you to make several basic configuration adjustments
to the DSC from the same menu screen (all the Quick Setup options are also available on
other OSD menus).
NOTE: On this submenu, the DSC HD-3G A has an
Input
EDID
option, which is not
on the DSC 3G-HD A
Quick
Setup
on the previous page).
Figure 15.
Quick Setup Submenu — DSC HD-3G A
DSC 3G-HD A and DSC HD-3G A • Operation
18