Xylem OxiTopIS OC100 - Manual (Page 74)

GLP / Tools GLP / Tools
74 BA31114e5 07/2006 BA31114e5 07/2006 75
In the selection of erase “All“ samples, the following display appears:
The controller asks again if you
really want to erase the samples
from the memory.
Further: See above.
If no finished samples are available in the memory, the following
display appears:
Reset/release
This function can be used to release measuring heads again that were unintentionally
started.
Caution: After carrying out the “Reset/release“, the data of the measuring head
is
erased!
Use to select the
Reset/release menu item.
The serial number of the
measuring head and the sample
number appear on the display.
Press if you want to
release the measuring head.
(If you do not want to release the
measuring head, select and
confirm it with “Return“.)
Display message: The release/
reset has been performed.
Repeat the process for each of
the measuring heads to be
released.
Display message when the last measuring head of a sample has
been released:
Use to return to the
Reset/release menu.