Xylem OxiTopIS OC100 - Manual (Page 20)

Operating Mode: Routine BOD Operating Mode: Routine BOD
20 BA31114e5 07/2006 BA31114e5 07/2006 21
Erase data of finished samples
This function erases the data of finished samples from the sample management of the
controller. You can only erase a sample if it is finished; in non-finished samples, the
menu item “Erase sample“ does not appear.
Starting point: sample
management .
Use
to select a finished sample.
Use
to select the “Erase sample“
submenu.
Safety query with possibility to
return.
The sample has been erased.
After the message, the controller automatically returns to the starting
menu, “Sample management“.
Show measuring head list
This function is used to allocate a measuring head to the relevant sample.
Use
to select “ list“.
Point the controller at the measuring
heads: 40 cm to 100 cm
“List“, i.e. a measuring head is
displayed together with the serial
number of the measuring head.
The controller transmits the call
up of the selected sample. The
allocated measuring head flashes
for approx. 5 seconds.