Xylem OxiTopIS OC100 - Manual (Page 34)

Operating Mode: Standard BOD Operating Mode: Standard BOD
34 BA31114e5 07/2006 BA31114e5 07/2006 35
the chapter “What to do if...“
Point the controller at the measuring
heads: 40 cm to 100 cm
The call up of further measuring
heads is performed in the
scanner mode.
Message that all the data of all
the measuring heads has been
called up. The instrument then
returns to the input menu.
Immediately after the data transfer of the complete measurement data records of a
finished measuring head, this measuring head is given the “free” status. The
measuring head can be used for a new measurement. The relevant sample in the
sample management is marked as finished (see the chapter “Sample management”).
Sample management
Entry into the sample management.
A list of samples appears in the display (if samples are available):
Data of samples that have been started in the standard BOD operating mode is not
listed in the routine BOD operating mode.
Reporting order:
- At the upper end of the list: finished samples (if available)
- Under this: current samples
Sorting of the samples: according to date and
sequential number 01 ... 99 from the oldest to the newest sample.
Select a sample.