Xylem OxiTopIS OC100 - Manual (Page 18)

Operating Mode: Routine BOD Operating Mode: Routine BOD
18 BA31114e5 07/2006 BA31114e5 07/2006 19
Select a sample.
Depending on the sample selected, one of the two following menus
appears. The header line contains the:
- sample number
- Id number (e.g. I001)
- BOD type and run time
of the selected sample.
Finished sample Current sample
Show sample
This function is used to find the measuring heads. A sample labeling is not necessary.
Starting point: sample
management .
Use
to select a sample.
Use
to select “Show sample“.
Point the controller at the measuring
heads: 40 cm to 100 cm
The controller transmits the call
up of the selected sample. The
allocated measuring head flashes
for approx. 5 seconds.
After the message, the controller automatically returns to the
previous menu.