Xylem OxiTopIS OC100 - Manual (Page 2)

Safety Instructions
2 BA31114e5 07/2006 BA31114e5 07/2006 3
Please read these safety instructions carefully before installing
the instrument!
This instrument is built and checked according to IEC 1010, safety rules for
electronic measuring instruments and left the factory secure from a safety
engineering aspect.
The smooth functioning and operational safety of the equipment can only be
guaranteed by following the general safety precautions applicable and the special
safety instructions given in this operating manual.
– The trouble-free function and operational safety of the instrument can only be
guaranteed by following the climate conditions specified in the chapter
"Technical data" in this operating manual.
– If the system is transported from a cold environment to a warm environment, its
function can be impaired as a result of condensation forming. In this case, the
temperature of the equipment must be allowed to adapt to room temperature
before putting it into operation again.
– Adjustment of the equipment and maintenance or repair work must only be
performed by personnel authorized by WTW.
– If safe operation is no longer possible, the equipment must be taken out of
service and secured against inadvertent operation by labeling with warning
signs.
– The safety of the user can be affected by the instrument if, for example,
• the instrument is visibly damaged,
• the instrument no longer operates as prescribed,
• the instrument has been stored under adverse conditions for a lengthy
period of time,
• the instrument was exposed to adverse transport conditions.
– Basically, if you are in any doubt, please return the instrument for repair or
maintenance to the manufacturer of the equipment,
"Wissenschaftlich-Technische-Werkstätten GmbH".