Advanced instruments inc, Menu navigation – Analytical Industries GPR-1600 Series Trace PPB Oxygen Analyzer User Manual
Page 24
Advanced Instruments Inc.
24
Note:
In the event power to the analyzer is interrupted, the system defaults to the “Standby” mode when power is
restored. To resume sampling, advance the cursor (*) to “Sample” mode, press ENTER to select and select the
range mode as described below.
Menu Navigation
The four (4) pushbuttons located on the front of the analyzer control the system’s micro-processor:
1. Green - ENTER (select)
2. Yellow UP ARROW – advance cursor up
3. Yellow DOWN ARROW – advance cursor down
4. Red – ESC (menu)
Select menu option by advancing cursor (*) by repeatedly pressing the yellow UP/DOWN ARROW keys.
Accept the menu option selected with cursor (*) by pressing the green ENTER key.
Abort the menu option selected with cursor (*) and return to the previous menu by pressing the red ESC key.
Note:
If a selection is not made within 30 seconds, the system returns to the MAIN MENU.