Asus GigaX2048 - Manual (Page 94)

82
GigaX2024/2048 L2 Managed Switch User Manual
5.3.7 QoS Commands
[State] [No/CoS/DSCP]
Allows users to set up trust state of some particular ports.
CLI command: qos trust state
[CoSOverride] [Disable/Enable]
Allows users to enable or disable CoS override of some particular ports. CoS
override only can be enabled when trust state is ʻNoʼ trust.
CLI command: qos trust override
[CoS to DSCP]
Allows users to set up the CoS to DSCP map.
CLI command: qos map cosdscp
[DSP to CoS]
Allows users to set up the DSCP to CoS map.
CLI command: qos map dscpcos to
[Class Name]
[Match][None/Filter/DSCP]
[Filter Set ID]
[DSCP][0/8/10/16/18/24/26/32/34/40/46/48/56]
[Add]
Creates a new class with specifying a unique class name and match mode. If
the match mode is ʻFilterʼ, users must input an existed filter set ID. If the match
mode is ʻDSCPʼ, users must input DSCP values. If users input ,
id> will not display, and force to 0.
CLI command: qos class new
CLI command: qos class match
dscp (0/8/10/16/18/24/26/32/34/40/46/48/56):
acl id:
[Modify]