Figure 18. administration figure 19. reboot, 3 administration, 4 reboot – Asus GigaX2048 User Manual

Page 30: 5 firmware upgrade

GigaX2024/2048 L2 Managed Switch User Manual

4.3.3 Administration

The Administration page allows to enable or disable the password protection for

web user authentication. The default setting does not require any authentication.
To save any changes and make it effective immediately, click

OK. Use Reload

to update the setting, as shown in Figure 18. When you enable the password

protection, you have to login again immediately.

You can change the password at any time through the CLI

interface.

Figure 18. Administration

4.3.4 Reboot

The Reboot page contains a

Reboot button. Clicking the button to reboot the

system.

Rebooting the system stops the network trafﬁc and terminates

the Web interface connection.

Figure 19. Reboot

4.3.5 Firmware Upgrade

The Firmware Upgrade and Auto-conﬁg page contains the following information:

Hardware Version: shows the hardware revision number.
Boot ROM Version: shows the version of the boot code
Firmware Version: shows the current running ﬁrmware version. This

number renews automatically after ﬁrmware update is complete.

Note

Warning

This manual is related to the following products:

GigaX2024M GigaX2024