Asus GigaX2048 - Manual (Page 87)

75
GigaX2024/2048 L2 Managed Switch User Manual
[Destination Port] [Type/Port]
[Protocol] [ICMP/TCP/UDP/ANY]
[Add]
User can add a new IP rule associated to a filter set. These filter rule works with
ICMP, TCP or UDP protocols with permit or deny options. User can also specify
the IP address (source or destination) and port number of the filter rule using the
CLI command dstip/srcip and dstport/srcport, respectively.
CLI command: filter rule new
any>
CLI command: filter rule dstip
CLI command: filter rule srcip
CLI command: filter rule dstport
CLI command: filter rule srcport
[Rule Mode] [MAC Rule]
[Action] [Permit/Deny]
[Source MAC]
[Destination MAC]
[Modify]
Allows user to modify the MAC filter rule.
CLI command: filter rule modify
UDP/any>
CLI command: filter rule dstmac
address])>
CLI command: filter rule srcmac
address])>
[Rule Mode] [IP Rule]
[Action] [Permit/Deny]
[Source IP] [Type/IP, Mask]
[Destination IP] [Type/IP, Mask]
[Source Port] [Type/Port]