Asus GigaX2048 - Manual (Page 86)

74
GigaX2024/2048 L2 Managed Switch User Manual
5.3.5 Filters Commands
[New]
Creates a new filter set with specifying a unique ACL ID and its description
name.
CLI command: filter set new
[Remove]
User can delete a filter set by indicating the ACL ID.
CLI command: filter set delete
[Edit]
[Rule Mode] [MAC Rule]
[Action] [Permit/Deny]
[Source MAC]
[Destination MAC]
[Add]
User can add a new MAC address rule associated to a filter set. These filter rule
works with ICMP, TCP or UDP protocols with action of permit or deny. User can
also specify the MAC address (source or destination) of the filter rule by using
CLI command dstmac and srcmac.
CLI command: filter rule new
any>
CLI command: filter rule dstmac
address])>
CLI command: filter rule srcmac
address])>
[Rule Mode] [IP Rule]
[Action] [Permit/Deny]
[Source IP] [Type/IP, Mask]
[Destination IP] [Type/IP, Mask]
[Source Port] [Type/Port]