Asus GigaX2048 - Manual (Page 46)

34
GigaX2024/2048 L2 Managed Switch User Manual
go to Save Configuration page, then click on Save.
Figure 42. VACM View
4.6.6 USM User
USM(User-based Security Model) User is used to configure the information of
SNMPV3 USM User.
Engine Id: enter the Engine Id that should match the ID in the Manager..
Name: enter Name combined with Engine ID that should match the Name
and Engine ID in the Manager.
Auth Protocol: enter the Auth Protocol that Engine ID and Name belong.
Only NoAuth ,MD5, SHA1 can be chosen. If the NoAuth is chosen, there is
no need to enter password.
Auth Password: enter the password that the Auth Protocol belongs. The
password needs at least 8 characters or digits.
Priv Protocol: enter the Priv Protocol that Engine ID and Name belong.
Only NoPriv ,DES can be chosen. If the NoPriv is chosen, there is no need
to enter password.
Priv Password: enter the password that the Priv Protocol belongs. The
password needs at least 8 characters or digits.
Click on Add when you create a new USM User entry by the above information.
Then you will see the new added entry shows in the User window. You can
remove the existed User by selecting the entry with the mouse, then clicking
on Remove. The Modify button updates the existed USM User entries. Click
OK to make the setting effective immediately. Click Reload to refresh the
settings to current value. To save configuration permanently, please go to Save
Configuration page, then click on Save.