Asus GigaX2048 - Manual (Page 75)

63
GigaX2024/2048 L2 Managed Switch User Manual
**For GigaX 2048
[Mirror] [Mirror 1/Mirror 2]
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch. User can create a maximum of two
mirroring ports on the switch. One is associated to a SoC., which means mirror
ID 1 is dedicated to SoC 0, and mirror ID 2 is dedicated to SoC 1. Therefore,
only port number 1-24 can be assigned to mirror ID 1 as monitor port, ingress
port(s), or egress port (2). Only ports 25-48 can be assigned to mirror ID 2 as
mirroring ports.
CLI command: l2 mirror create
CLI command: l2 mirror ingress
CLI command: l2 mirror egress
CLI command: l2 mirror remove
list>
**For GigaX 2024
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch.
CLI command: l2 mirror create
CLI command: l2 mirror ingress
CLI command: l2 mirror egress
CLI command: l2 mirror remove
[Reload]
Restores the previous saved settings from configuration file.
CLI command: l2 mirror retrieve
[Show Group]
Displays the static multicast groups that are presented in the multicast group
table.
CLI command: l2 mcast show