Asus GigaX2048 - Manual (Page 69)

57
GigaX2024/2048 L2 Managed Switch User Manual
5.2 Login and Logout
By typing login to enter the CLI mode, you have to give a valid user name
and password. As the first time login, you can enter admin as the user name
and bypass the password. For security reason, please change the user name
and password after login. Once you forget the use name and password, you
may contact ASUS support team or erase the whole configuration file in the
Boot ROM Command mode. If you take the second choice, the whole system
configuration is lost at the same time. That is, you have to configure the switch
again.
Type
logout to leave the CLI mode safely. This action allows you to secure the
CLI mode. The next user has to do login again with authorized user name and
password.
5.3 CLI Commands
The switch provides CLI commands for all managed functions. The command
uses are listed in the categories as the WEB management interface. This way,
you can follow the instructions and set up the switch correctly as easily as using
WEB interface to configure the switch.
Always use “?” to get the available commands list and help.
Always use “/” to get back to the root directory.
Always use “..” to get back to the parent directory.
Type the command only to get help for the command
5.3.1 System Commands
[System Name]
Displays the given name of the switch. This is an RFC-1213 defined MIB object
in System Group, and provides administrative information on the managed node.
CLI command: sys info name
If you put a name in the name description field, the switch system name changes
to the new one.
[System Contact]
Displays the detail information of contact about the switch. This is an RFC-1213
defined MIB object in System Group, and provides contact information on the
managed node.
CLI command: sys info contact
Note