Asus GigaX2048 - Manual (Page 76)

64
GigaX2024/2048 L2 Managed Switch User Manual
[MAC Address]
[VLAN]
[CoS] [0-7]
Allows user to add or modify a static multicast group by specifying the MAC
address, VLAN ID, Class of Service, VLAN port members, and its untagged port
members. Note that MAC address and VLAN ID combination is formed as an
unique entry in multicast group table.
CLI command: l2 mcast set
mac address [format: xx:xx:xx:xx:xx:xx]:
vlan id [1 by default]:
cos [0-7, 0 by default]:
port list [format: 1 2 3 4-50/* for all ports]:
untagged port list [format: 1 2 3 4-50/* for all ports]:
[Remove Multicast Group]
Allows user to delete a static multicast group entry from multicast group table by
given a MAC address and VLAN ID.
CLI command: l2 mcast delete
mac address [format: xx:xx:xx:xx:xx:xx]:
vlan id:
[Reload]
Restores the previous saved settings from configuration file.
CLI command: l2 mcast retrieve
[IGMP is] [Enabled/Disabled]
Layer 2 IGMP snooping can be started or terminated by user if necessary.
CLI command: l2 igmp
[Reload]
Restores the previous saved settings from configuration file.
CLI command: l2 igmp retrieve
[Broadcast] [Enabled/Disabled]