Asus GigaX2048 - Manual (Page 52)

40
GigaX2024/2048 L2 Managed Switch User Manual
4.8.2 Dial-In User
Dial-in User is used to define users in the local database of the switch.
User Name: New user name.
Password: Password for the new user.
Confirm Password: Enter the password again.
Dynamic VLAN: Specify the VLAN ID assigned to 802.1x-authenticated clients.
Please click Add to add the new user. Click Modify when youʼre done with
the modifications. Click Remove when you want to remove the selected user.
Click OK to make the setting send to the switch (HTTP server). Click Reload to
refresh the settings to current value. To make the configuration effective, please
go to Save Configuration page, then click Save.
Figure 50. Dial-In user
4.8.3 RADIUS
In order to use external RADIUS server, the following parameters are required to
be setup:
Authentication Server IP: The IP address of the RADIUS server.
Authentication Server Port: The port number for the RADIUS server is
listening to.
Authentication Server Key: The key is used for communications between
GigaX and the RADIUS server.
Confirm Authentication Key: Re-type the key entered above.
The VLAN of the RADIUS server connected to the switch must
be the same as the VLAN of the system management interface.
Note