Asus GigaX2048 - Manual (Page 39)

27
GigaX2024/2048 L2 Managed Switch User Manual
4.5.8 Static Addresses
You can add a MAC address into the switch address table. The MAC address
added by this way will not age out from the address table. We call it static
address. The switch only allows 1024 static addresses.
MAC Address: enter the MAC address
VLAN ID: enter the VLAN ID that the MAC belongs
Port Selection: select the port which the MAC belongs
Discard: you can do packet filtering when the MAC address appears in the
packets as destination address, source address, or either of them.
Click on the Add when you create a new static MAC address by the above
information. Then you will see the new added entry shows in the address
window. You can remove the existed address by selecting the entry with the
mouse, then clicking on Remove. The Modify button updates the existed MAC
address entries. You can look up a static address entry by MAC address and
VLAN ID, then click on the Query. Click OK to make the setting send to the
switch (HTTP server). Click Reload to refresh the settings to current value. To
make the configuration effective, please go to Save Configuration page, then
click Save.
Figure 32.Static Address
4.5.9 Tagged VLAN
You can set up to 255 VLAN groups and show VLAN group in this page. There
is a default VLAN created by the switch. This feature prevents the switch from
malfunctions. You can remove any existed VLAN except the default VLAN.
You can assign the port to be a tagged port or an untagged port by toggling the
port button. There are three types of button displays:
“U” type: untagged port that will remove VLAN tags from the transmitted
packets.