Net Optics iTap 10 GigaBit Port Aggregator - Manual (Page 57)

iTap 10 GigaBit Port Aggregator
53
Appendix B
Command Line Interface
Tip! _____________________________________________________________________
The command line interface (CLI) is not case sensitive.
__________________________________________________________________________
Command Sub-Command Syntax Description
Help Set help set Displays the set command
options
Reset help reset Displays the reset command
options
Show help show Displays the show command
options
Echo help echo Displays the echo command
options
Set IP set ip Where
IP address of the iTap for
Web Manager and System
Manager
Netmask set netmask Where
address netmask
Gateway set gateway Where
address of the gateway
Manager set manager Where
address of the remote man-
ager for SNMP traps
Threshold Port set threshold Where is A, B, 1,
or 2 and is
0 to 100% of available
bandwidth
Time set time Where is
mm/dd/yyyy-hh:mm:ss
Display set display Where is
1 = Front panel display on
2 = Front panel display off
(other values not applicable)
Note: In the OFF state, the
display shows "Net Optics,
Inc." and the firmware
compile date