Net Optics iTap 10 GigaBit Port Aggregator - Manual (Page 43)

iTap 10 GigaBit Port Aggregator
39
Using the Toolbar
The following figure shows the System Manager toolbar.
Figure 18: System Manager Toolbar
The table below describes the icons found on the toolbar.
Tool Description
New Node Add iTap devices to a group
New Group Create an iTap group
Delete Delete an iTap device from the system
Modify Change the iTap device name, IP address, model, and notes
Refresh Refresh the data display
Admin Change the System Manager User Name and Password
Exit Close Net Optics System Manager
About View information about System Manager
Create a System Manager Group
You can organize iTap devices into groups for quick access. You must create a
Group before you can add iTap devices to your system.
To create an iTap group:
1. Click New Group in the toolbar. A new group bar appears in the System Frame
as shown in the following figure.
Figure 19: New Group
2. Type the name of the new group and press Enter.