beautypg.com

Connect the management port to the network – Net Optics iTap 10 GigaBit Port Aggregator User Manual

Page 22

background image

iTap 10 GigaBit Port Aggregator

18

Connect the Management Port to the Network

To use the remote interfaces you must connect the Management Port on the back

of the unit to the network. You may wish to connect the Management Port on a

dedicated management VLAN for increased security.

To connect the Management Port:

1. Connect a CAT5 or CAT5e cable to the Management Port as shown in the

following figure.

Figure 9: Connecting the Management Port

2. Connect the other end of the cable to a network switch or hub.

Management

Port

RS232

To network switch or hub