GE Industrial Solutions Entellisys 4.0 System Administrator Manual User Manual
GE Industrial Solutions Equipment
Table of contents
Document Outline
- Contents
- 1.1 Security Champion 7
- 4.1 HMI User configuration 13
- 4.2 Modbus® security 17
- 5.1 Time synchronization configuration screen 22
- 5.2 Basic time sync configuration for stand-alone systems 23
- 5.3 Time Sync configuration for multiple lineups 24
- 5.4 Using an external time server 25
- 5.5 Troubleshooting 26
- 6.1 Network re-configuration procedure 29
- 6.2 Changing the CPU IP address 30
- 6.3 Changing the local HMI IP address 31
- 6.4 Verify local communication to CPU 32
- 6.5 Network security/VPN device 33
- 7.1 Installing and configuring remote HMI 35
- 7.2 Multiple lineups 37
- 7.3 Configuring Lineups 38
- 8.1 Offline mode 41
- 8.2 Viewing and comparing settings files 42
- 8.3 Writing settings to a live system 43
- 8.4 Resetting the offline settings files to the current settings 44
- 9.1 Publishing shared files 45
- 9.2 Updating an HMI with shared files 46
- 10.1 Restoring an archive 48
- 10.2 Creating an archive 48
- 11.1 Viewing installed options 51
- 11.2 Upgrading options 52
- 12.1 Part I - Preparation for replacement of a CPU 55
- 12.2 Part II - Replacing the CPU 58
- 13.1 Viewing and updating circuit breaker names 65
- 13.2 Viewing and updating circuit breaker accessories 66
- 13.3 Installing CPU firmware 68
- 13.4 Viewing zone configuration 69
- System administrator roles and responsibilities
- Pre-programming settings prior to switchgear arrival
- Commissioning the switchgear
- User administration
- Time synchronization
- Establishing communication to Remote HMIs
- Remote HMI Software
- Settings files and offline system configuration
- Sharing files across HMIs
- System archives
- Feature options
- Preparing and configuring a replacement CPU
- Other maintenance functions
- Administrator access to the operating system