dbx PMC16 - Manual (Page 54)

PMC 16 Owner’s Manual 48
the top panel knobS
The four knobs on the top panel of the PMC16 provide quick access to the following PMC16
global parameters:
REVERB
This control allows for quick adjustment of the reverb’s return level, which affects the
overall reverb level. This control has a range of -120 dB to +6 dB and the knob’s twelve
o’clock position represents approximately -10 dB.
LOW
This control affects all outputs and is used to control the low-end frequencies of the
overall mix. The filter adjusted by this control is a low band shelving filter. This control
has a range of +/- 12 dB and the knob’s twelve o’clock position represents 0 dB.
HIGH
This control affects all outputs and is used to control the high-end frequencies of the
overall mix. The filter adjusted by this control is a high band shelving filter. This control
has a range of +/- 12 dB and the knob’s twelve o’clock position represents 0 dB.
MASTER
This control allows for quick adjustment of the master output level. This control affects all
outputs and is pre-limiter. This control has a range of -120 dBu to +6 dBu and the knob’s
twelve o’clock position represents approximately -10 dBu.