Quick start, 6quick start – dbx PMC16 User Manual
Page 12
PMC
16
Owner’s Manual
6
Quick Start
Configuration
1. Mount the PMC16 to a mic stand, if desired.
2. If connecting to a wedge monitor, turn off the power to the amplifier or powered
monitor.
3. Ensure the PMC16’s
counterclockwise).
4. Using the appropriate output connector, connect the PMC16 to the desired
monitoring device (i.e. headphones, in-ear monitor transmitter, amplifier, or
powered wedge monitor).
5. Connect the BLU link output of the sending BLU link device to the PMC16’s BLU
LINK IN port.
6. Connect the BLU LINK OUT port of the PMC16 to the next BLU link device in the
ring.
7. Connect the included power supply to the PMC16’s power input jack and the other
end to an available AC outlet.
8. Run the PMC16’s Setup Wizard by pressing the
Wizard” is selected on the display then press the
encoder to begin the
Wizard. Select the “RUN ALL SETUP ITEMS” option and press the
encoder.
9. Follow the on-screen instructions and select the appropriate options for your
system configuration.