dbx PMC16 - Manual (Page 13)

PMC 16 Owner’s Manual 7
10. When prompted, store the configuration to a preset. Follow the on-screen
instructions to name the preset and select a location in which to store the preset.
11. Once the Wizard is complete, press the button to return to Live mode.
12. Apply power to your amplifier or powered monitor.
13. Send signal to the PMC16 (signal presence can be verified on the PMC16’s LCD
display which displays all input level meters on the Meters page).
14. Slowly raise the PMC16’s level control to the initial desired listening
level.
Operation
15. Use the mute and solo functions to help create your mix, bringing channels into
focus using SOLO or eliminating channels from the mix using MUTE.
16. Adjust channel levels by using the button, buttons,
and the encoder.
17. Adjust channel pans by using the button, buttons, and
the encoder.
18. Turn the control to adjust how much overall reverb you would like in
the mix. If you would like to further adjust each channel’s reverb effect send level,
press the button and use the buttons for selecting
channels. Turn the encoder to edit the selected effect send level(s).
19. If desired, save the mix to a preset by pressing the button and following
the on-screen instructions.