dbx PMC16 User Manual

Page 38

PMC

Owner’s Manual

control, providing variable control ranging from normal stereo to mono summed. Because

of this, a stereo linked channel pair cannot be mono summed and then panned left or

right of center.
GROUP NAMES

This menu allows you to name each group. Names can be edited manually or selected

from a list. To manually name a group, use the

encoder to select the group then

follow the on-screen instructions. When finished, scroll to “Next” then press the

encoder.
GROUP ASSIGNMENTS

Groups are designed to allow the end user to manipulate multiple channels in unison. To

assign channels to groups, select the desired group by turning the

encoder then

press the

button for each channel you wish to add to the group. The

top channel status LED on the Channel Select button will light green for each channel

added to the selected group. Repeat if you have other channels which require grouping.

Note:

Channels can only be assigned to one group. When assigning groups, the top

channel status LED on the Channel Select button will light red for any channel which is

already assigned to another group.
REVERB TYPE

The PMC16’s reverb offers 5 Lexicon® reverb types. The available options in this menu are:

ROOM, SMALL PLATE, LARGE PLATE, SMALL HALL, and LARGE HALL. The wet/dry parameter

is fixed at 100% since the reverb is configured as a send/return effect in the signal path.

The overall amount of reverb effect can be adjusted using the REVERB control on the

PMC16’s top panel.