dbx PMC16 - Manual (Page 49)

PMC 16 Owner’s Manual 43
Adjusting Effect Sends
The Effects page allows you to adjust each channel’s effect send level.
To adjust a channel’s effect send level:
1. Press the button. You should now be in the Effects Edit page,
indicated by the EFFECTS button LED lighting.
2. Select the channel(s) and/or group(s) which you would like to edit, using the
button(s) (the LED on the top of the selected Channel
Select button(s) will light green, indicating your selection).
3. Turn the encoder to adjust the effect send levels of all selected
channels.
4. Repeat steps 2-3 to adjust the effect send level(s) of any other channel(s).
ActivAtiNg groups: To enable the Group function to adjust the effect send levels
of all channels within a group respectively, press the button then perform the
above steps.