dbx PMC16 - Manual (Page 45)

PMC 16 Owner’s Manual 39
Using Multi-Select
The PMC16’s operation was designed to provide an efficient workflow. There is a feature
which was designed to allow the user to perform tasks on multiple channels as quickly
as possible. This feature is referred to as “Multi-Select”. Multi-Select is used during Live
Mode operation and allows for quick selection of multiple channels and/or groups for
multi-channel muting, soloing, or editing of channel levels, pans, or effect send levels.
To use Multi-Select:
1. Press and hold the button for the first channel or group
you would like to select.
2. With the first selected channel’s button still held down,
press and release the button for each additional channel
or group you would like to add to the multi-selection then release the
button which you have been holding.
3. Press the button for the desired function to edit (i.e. , ,
, etc.).
4. Turn the encoder to adjust the parameters for the selected channels/
groups respectively.
5. Press any button to dissolve the multi-selection.
Note:
Relative values are retained unless a channel’s level, pan, or effect send level is
pushed beyond the maximum allowed value or below the minimum allowed value.