dbx PMC16 - Manual (Page 48)

PMC 16 Owner’s Manual 42
Adjusting Channel Pans
The Pan page allows you to adjust each channel’s pan setting.
To adjust a channel’s pan:
1. Press the button. You should now be in the Pan Edit page, indicated by
the PAN button LED lighting.
2. Select the channel(s) and/or group(s) which you would like to edit, using the
button(s) (the LED on the top of the selected Channel
Select button(s) will light green, indicating your selection).
3. Turn the encoder to adjust the selected channels’ pan settings.
4. Repeat steps 2-3 to adjust the pan(s) of any other channel(s).
ActivAtiNg groups:
To enable the Group function to adjust the pans of all channels
within a group respectively, press the button then perform the above steps.
Note:
When Group is enabled, adjustment of stereo linked pan settings within a group
is not supported.