dbx PMC16 - Manual (Page 32)

PMC 16 Owner’s Manual 26
Setup Mode–the Setup Wizard & Setup MenuS
Setup Mode Introduction
Setup Mode allows the system engineer to initially configure the PMC16 and consists of
the Setup Wizard and Setup Menus. It is accessed by pressing the button.
Typically, the system engineer would run through the Setup Wizard first, in order to
select routing of BLU link audio channels to the PMC16, link stereo channels, name input
channels, create and name groups, and optimize outputs for the type of monitoring
system used.
Once configuration is complete, using the Setup Wizard, the system engineer will be
prompted to save the preset which contains the configuration created by the Setup Wizard.
If desired, the system engineer can then enter the Setup Menus to manually tweak the
configuration and set global system parameters. The edited preset can then be updated
(or re-stored). The PMC16 is now in Live Mode and ready for use by the on-stage musician.