beautypg.com

2 operating mode – PowerWalker Battery pack for VFI 10000P_RT LCD User Manual

Page 37

background image

33

After powering on, the LCD will display Welcome logo for several

seconds and then enter to the default page which shows the UPS status

summary. The display automatically returns to the default UPS status

summary screen when no button has been pressed within 15 minutes.

On the UPS status summary screen it provides the following information:

Status summary, including mode and load

Alarm status, if any are present

Notes: alarm including fault and warning information

Battery and charger status, including battery voltage, charge level

and charger status

Running information and running time

Figure 5-2 The default LCD display

There are more operation details for LCD is illustrated in the chapter of

5.4

5.2 Operating mode

The different graphic symbol could be displayed corresponding to

current operating mode or status.