PowerWalker Maintenance Bypass Switch - Manual

1. Introduction
The product is used as an external power distribution unit in conjunction with UPS systems or
large-scale voltage regulators. It allows to manually transfer the connected equipment to
utility power via a bypass switch, permitting scheduled maintenance or UPS replacement
without power interruption. Combined power distribution feature and the master-controlled
design, it provides maintenance bypass function and power saving within a compact
mechanism.
Wall Mount the Unit
The unit can be mounted to a wall surface. Please follow
below steps:
1. Use tape to hold this page in place against the wall.
2. Use a sharp nail to puncture the center of the two holes
to mark the wall. (see below chart 1)
3. Mount the unit by positioning the key-hole slots over
the mounting nails. (see chart 2)
2. Product Overview
Schuko Type French Type
IEC Type
Master output receptacle Modem/phone line surge protection
(for connecting a computer) Circuit breaker
Slave output receptacles AC input
(for connecting peripherals) Function switch
Socket to UPS output
δ
Power LED
Socket to UPS input
ε
Master/Slave Function LED
Bypass switch
Maintenance
Bypass Switch
Quick Guide
V. 1.0