PowerWalker Battery pack for VFI 10000P_RT LCD User Manual

Page 30

2) Users need to use a specialty 15-pin communication cable for

this system, which should have 15 cores, corresponding

stitches and shield, as the UPS parallel cable. The length of the

parallel cable is appropriate to be less than 3 m.

3) Strictly follow the chapter of 4, the wiring requirement of single

UPS to perform the wiring of each UPS.

4) Independent battery packs for each UPS.

5) Please connect the input and output wires, fix all the wiring

according to the Figure 4-5 and make sure all these breakers

are open.