B&B Electronics I-7060 - Quick Start Guide - Manual (Page 45)

Getting Started for I-7000 Series Modules
Date: Jan-08, 2002 Version 1.02 page: 45
5.5 Functions and Demo Programs
There are several functions designed for the Watchdog. For detailed
information about these functions, please refer to the NAP7000P user’s
manual. These functions are listed as follows:
HostIsOK : Tells all modules "Host is OK" by sending the "~**" command.
ReadModuleResetStatus : Reads the module reset status.
ToSetupHostWatchdog : Sets up the module's Host Watchdog.
ToReadHostWatchdog :
Reads the module's Host Watchdog setup values.
ReadModuleHostWatchdogStatus :
Reads the module's Host Watchdog status.
ResetModuleHostWatchdogStatus :
Resets the module's Host Watchdog status.
SetSafeValueForDo : Sets up the safe values for DO modules.
SetPowerOnValueForDo : Sets up the power on values for DO modules.
SetSafeValueForAo : Sets up the safe values for AO modules.
SetPowerOnValueForAo : Sets up the power on values for AO modules.
SetPowerOnSafeValue :
Sets up the power on and safe values for modules.
There are some sample programs for the Watchdog. They are written
in VB, Delphi and BCB computer languages, and placed into their respective
demo folders. These demo programs are listed as follows:
SafeAI : Host Watchdog and Safe value demo for analog input modules.
SafeAO : Host Watchdog and Safe value demo for analog output modules.
SafeDO : Host Watchdog and Safe value demo for digital output modules.
Watchdog : Host Watchdog and Module Watchdog demo.
Users can find these functions and demo programs in the NAP7000P
version 3.3 .