B&B Electronics I-7060 - Quick Start Guide - Manual (Page 15)

Getting Started for I-7000 Series Modules
Date: Jan-08, 2002 Version 1.02 page: 15
During startup, the 7000 Utility reads the “ ICPCON.CFG ” file to get the
COM port, baud rate and checksum information. After startup, the main
window of the
7000 Utility comes on and uses this information to
automatically start the searching process.
The 7000 Utility tests for a range of COM ports and baud rates in order
to search for the connected I-7000 series modules. If it fails to read the
“
ICPCON . CFG “ file (for example, if it does not exist), the default setting for
the COM port is 2, the baud rate is 9600 and checksum is enabled. This
means that the search process would be limited to
COM2 and the baud rate
speed would be 9600.
When quitting the 7000UTIL.EXE , the selected COM port numbers,
baud rates and checksum settings are stored into the “ ICPCON.CFG ” file.