B&B Electronics I-7060 - Quick Start Guide - Manual (Page 36)

Getting Started for I-7000 Series Modules
Date: Jan-08, 2002 Version 1.02 page: 36
Figure 4-1-5. The “ 7000 OCX ” and "CommandButton" on Form1.
Add these codes in the sub routine “ Command1_Click() ”
Private Sub Command1_Click()
NAP7000X1.ComPort = COM2
'Use COM2
NAP7000X1.Address = 1 'module address: 1
NAP7000X1.BaudRate = 9600 'setting the baudrate
NAP7000X1.CheckSum = False 'checksum disable
NAP7000X1.PortOpen = True 'Open the ComPort
NAP7000X1.ModuleType = I_7013 'Module ID
Command1.Caption = NAP7000X1.AI 'Get Analog input value
NAP7000X1.PortOpen = False 'Close the ComPort
End Sub
Run the program and click on the “ Command1 ” button. The caption of the
“ Command1 ” button shows the analog input value. Refer to Figure 4-1-6.
Figure 4-1-6. Shows the analog input value from the module.
The NAP7000X software package provides a user’s manual in HTML
format. For detailed descriptions of each property, method and event, please
refer to the NAP7000X user’s manual. It also contains demo programs for
Visual Basic, Visual C++, Delphi and BCB with complete source code.