B&B Electronics R-SeeNet-5 - Manual - Manual (Page 59)

52
6. AUTOMATIC UPDATE OF ROUTERS
6. Automatic update of routers
6.1 Location of configuration and firmware
Files with the firmware and configuration for each router must be placed in the directory of
monitoring system R-SeeNet/httpdocs/temp_update.
6.2 Monitoring system settings
If you want to enable automatic update of router configuration, check the AutoUpdate item
on the Device List page (see section 4.2 Device List). To change the properties of the router
is necessary to be log in into the system.
6.3 Router settings
The router must have enabled the automatic update of firmware (possibly also update of
the configuration). As a Source choose HTTP server. In the Base URL item must be filled in
address of the server, where R-SeeNet is installed. It is also possible to fill in the name of the
downloaded configuration (Unit ID) and the frequency to check if the new configuration is on
the server (Update Hour ).
Figure 75: Automatic Update
A detailed description of the Automatic update settings in routers is explained in the Con-
figuration manual for v2 routers (see [1]).